D578UV_V1.12h firmware <<<<UPDATE VERSION That fixes some problems of the previous one..

THX TO:https://premier01.com/d578uv_firmware.html

⚠️⚠️ Attention ⚠️⚠️ the CPS 1.12 of the D578UV has a reading error of the equipment, DO NOT read the codeplug of the equipment with the CPS 1.12, because later you will not be able to open it, it will give you an error. The steps to follow are: 1- Make a copy of the previous codeplug (1.11) and keep it safe. 2- Install CPS 1.12 on the PC. 3- Update the firmware of the equipment. 4- Reset the equipment. 5- With the CPS open, open the codeplug of the previous version (1.11) and send it to the computer. Anytone goes on vacation for a few weeks for the Chinese New Year, on the way back we assume they will correct the fault. ⚠️⚠️⚠️

D578UV firmware update V1.12 (dated 2021‐02‐06)
Change List

  1. CPS->APRS-> AprsDisTime, allows to set the APRS display time on the screen.
  2. CPS->APRS -> AprsAltData, allows to set the APRS altitude to fixed beacon use.
  3. CPS->Optional Setting -> Key function, rename the key function “ FM radio” to “AM/FM”
  4. CPS->Public -> APRS -> Analog-> Digipeater Path, allows to input more digipeater paths.. (for all D578UV
    models)
  5. CPS->Optional Setting ->GPS Ranging ->Time Zone change from GMT to UTC
  6. Change the channel type indicate icon to cyan color when the mixed channel receive analog signal.
  7. CPS->Optional Setting -> Alert Tone -> Key Tone, change to turn off the key tone only. Other beep tones
    are keeping on.
  8. CPS->Analog->5Tone ->5Tone decode units, allows to filter the income 5Tone ID. For example, if the
    setting is 109, the radio will receive all the calls 5Tone ID start with 109.
    Firmware version: V1.12
    CPS version: V1.12
    SCT 3258 version: V2.01.07 BA (same, no need update)
    BT Version: 10036 (last version is 10033, you can stay at 10033 if you don’t need to use Android APP).

D878UV firmware update V1.22 (dated 2021‐02‐06)
Change List

  1. CPS->Public -> APRS -> Analog-> Digipeater Path, allows to input more digipeater paths..
  2. CPS->Optional Setting -> Alert Tone -> Key Tone, change to turn off the key tone only. Other beep tones
    are keeping on.
  3. CPS->Optional Setting ->GPS Ranging ->Time Zone change from GMT to UTC
  4. CPS->Analog->5Tone ->5Tone decode units, allows to filter the income 5Tone ID. For example, if the
    setting is 109, the radio will receive all the calls 5Tone ID start with 109.
  5. Resolve the issue that the channel setting changed in radio doesn’t save in codeplug.
  6. Resolve the issue that Lat set to S and write into radio, it will return to N when read the radio again.
  7. CPS->APRS-> AprsDisTime, allows to set the APRS display time on the screen.
  8. CPS->APRS -> Aprs Alt Data, allows to set the APRS altitude to fixed beacon use.
    Firmware version: V1.22
    CPS version: V1.22
    SCT 3258 version: V2.01.07 BA (same, no need update)
    BT Version: 10033

Por EA7IYR

Deja una respuesta