{"id":3655,"date":"2026-05-01T10:02:51","date_gmt":"2026-05-01T08:02:51","guid":{"rendered":"https:\/\/radio.xreflector.es\/?p=3655"},"modified":"2026-05-01T10:02:51","modified_gmt":"2026-05-01T08:02:51","slug":"wires-x-pc-software-ver-2-010-5-2026","status":"publish","type":"post","link":"https:\/\/radio.xreflector.es\/index.php\/2026\/05\/01\/wires-x-pc-software-ver-2-010-5-2026\/","title":{"rendered":"WIRES-X PC Software (Ver.2.010) &#8211; 5\/2026"},"content":{"rendered":"\n<p><a href=\"https:\/\/www.yaesu.com\/jp\/en\/wires-x\/contact\/pdf\/WIRES-X_Software_Ver_Up_Manual_2010_ENG.pdf\" target=\"_blank\" rel=\"noreferrer noopener\">WIRES-X PC Software Update Information (Ver.2.010) &#8211; 5\/2026<\/a><\/p>\n\n\n\n<p><a href=\"https:\/\/www.yaesu.com\/jp\/en\/wires-x\/contact\/wx2010en.zip\">WIRES-X PC Software (Ver.2.010) &#8211; 5\/2026<\/a><\/p>\n\n\n\n<p>Unzip the downloaded zip file into any arbitrary location.<\/p>\n\n\n\n<p><a href=\"https:\/\/www.yaesu.com\/jp\/en\/wires-x\/contact\/wiresmon-x2000en.zip\">WIRES-X Remote Monitor Software (Ver.2.000) &#8211; 3\/2026<\/a><\/p>\n\n\n\n<p>Unzip the downloaded file \u300cwiresmon-x****en.zip\u300d into any arbitrary location.<br>Move the unzipped file to \u300cwiresmon-x\u300d<br>Please refer how to use on the help file\u300cWIRESMON-X.chm\u300d<\/p>\n\n\n\n<p>WIRES-X PC Software Update Information<br>Version 2.0xx (Supports portable digital node functionality)<br>This software is for PCs used by WIRES-X node stations.<br>Important<br>Before downloading the software, please read the \u201cImportant Notes\u201d carefully.<br>Downloading this firmware will indicate your agreement with the contents of the \u201cImportant Notes\u201d.<br>If you are installing this software on a computer that already has WIRES-X software installed, please refer to the<br>software installation instructions on page 3.<br>Main changes in Ver. 2.0xx<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Added support for WIRES-X operation using FTX-1<br>The FTX-1 has built-in functionality equivalent to the HRI-200 and can be operated as a full-spec node.<\/li>\n\n\n\n<li>Router port forwarding settings are no longer required when operating as a node.<\/li>\n\n\n\n<li>When operating as a PDN, only information from connected stations can be displayed on the radio.<\/li>\n\n\n\n<li>Location information can now be changed via your PC.<\/li>\n\n\n\n<li>Other minor changes<br>While port forwarding is no longer required in Ver. 2.0xx, there are some combinations of rooms that cannot con-<br>nect due to incompatibility between the old and new software versions.<br>Compatibility chart for old and new software versions<br>Version of the connected room Version of my station<br>Ver. 1.xxx Ver. 2.0xx<br>Ver. 1.xxx 3 5 Cannot connect between the new version software to an<br>old version room.<br>Ver. 2.0xx<br>New Version Exclusive<br>Room 5 3<br>Cannot connect between an older version software to a<br>newer version room.<br>Port forwarding is not required when using new version<br>software to a new version room.<br>Room compatible with<br>older versions 3 3 Rooms compatible with older versions software require<br>port forwarding setup.<br>For owners who have already opened\/operated a room, we ask that you consider migrating to room operation us-<br>ing the \u201cOld Version Compatible Room Function\u201d with Ver. 2.0xx or later.<\/li>\n\n\n\n<li>If you already have an environment where a room is in operation (with an IPv4 Global IP and port forwarding en-<br>abled), migration is possible with only a software version upgrade.<br>Main changes in Ver. 2.010 (May 2026)<\/li>\n\n\n\n<li>Resolved an issue where Downlink audio could experience dropouts when multiple nodes in a Room initiated<br>Uplink transmission at the same time.<\/li>\n\n\n\n<li>Fixed a bug where the Ver. 1.5 node would disconnect if there was an uplink from the FTX-1 node.<\/li>\n\n\n\n<li>Fixed an issue where QSL images were not transmitted correctly upon connection.<\/li>\n\n\n\n<li>Fixed a display corruption issue in the popup list of connected Nodes when a Ver. 1.5xx node connected to a<br>Room with 129 or more node connections.<br>Depending on the node\/room version, there are combinations where the list of connected stations may not<br>be displayed correctly (see table below). Therefore, please use Ver. 2.010 for both the node and room.<br>Version of the<br>connected room<br>Version of my station<br>Ver. 1.5xx Ver. 2.000 Ver. 2.010<br>Ver. 2.000 5 3 5 Connections from versions 1.5xx and 2.010 will not<br>display correctly.<br>Ver. 2.010 3 5 3 Connections from Ver. 2.000 will not display correctly.<br>2<br>System Requirements<br>OS: Microsoft Windows\u00ae 11<br>Processor Clock Frequency: 2.0GHz or faster<br>RAM that meets the OS system requirements (4GB or more recommended)<br>Storage: 64GB or more free space (256GB or more SSD recommended)<br>Display resolution: 1366 x 768 or higher 16-bit high color or higher (32-bit true color is recommended)<br>USB port: Full-speed USB<br>LAN port: 100BASE-TX\/1000BASE-T or Wi-Fi: IEEE 802.11 b or higher Audio Interfaces*1<br>*1 Sound function is also required when using the \u201cPortable Digital Node Mode\u201d or \u201cPortable HRI<br>Mode\u201d. Furthermore, when communicating in \u201cDirect Operation\u201d in \u201cPortable HRI Mode\u201d using the<br>FT5D, FT3D or FT2D the personal computer must have the \u201caudio input from the microphone ter-<br>minal pass to the speaker output\u201d function.<br>3.5\u03a6 speaker terminal, 3.5\u03a6 microphone terminal*2 (It is necessary only for Internet communication in \u201cPortable<br>HRI Mode\u201d.)<br>*2 In the case of a unique terminal such as a laptop, adapt it to a 3.5\u03a6 speaker terminal and 3.5\u03a6 microphone ter-<br>minal with a commercially available conversion cable.<br>Speaker: It is necessary only when communicating in \u201cDirect Operation\u201d in \u201cPortable HRI Mode\u201d.<br>Internet Connection: High-speed lines such as fiber optic are recommended.<br>Important Notes<br>m All responsibility in using this firmware lies with the customer. We cannot be held responsible in any way for<br>damages or losses which may be incurred by the customer as a result of using this firmware.<br>m Copyrights and all other intellectual property rights for the firmware, as well as the manual, are the property of<br>YAESU MUSEN CO., LTD.<br>m The revision and modification of this firmware is prohibited. Redistribution, transfer, and resale of downloaded<br>files are also prohibited.<br>m Downloaded files are for personal use only.<br>m If assistance is needed to perform the firmware upgrade, please consult with one of our sales sites or service<br>centers<\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-embed is-type-wp-embed is-provider-xreflector-world-wide-servers wp-block-embed-xreflector-world-wide-servers\"><div class=\"wp-block-embed__wrapper\">\n<blockquote class=\"wp-embedded-content\" data-secret=\"QSQcaMlHUX\"><a href=\"https:\/\/radio.xreflector.es\/index.php\/colabora-con-nosotros\/\">Colabora Con Nosotros<\/a><\/blockquote><iframe loading=\"lazy\" class=\"wp-embedded-content\" sandbox=\"allow-scripts\" security=\"restricted\" style=\"position: absolute; visibility: hidden;\" title=\"\u00abColabora Con Nosotros\u00bb \u2014 Xreflector World Wide Servers\" src=\"https:\/\/radio.xreflector.es\/index.php\/colabora-con-nosotros\/embed\/#?secret=9wVlXHnrsA#?secret=QSQcaMlHUX\" data-secret=\"QSQcaMlHUX\" width=\"600\" height=\"338\" frameborder=\"0\" marginwidth=\"0\" marginheight=\"0\" scrolling=\"no\"><\/iframe>\n<\/div><\/figure>\n<p>Visitas: 701<\/p>","protected":false},"excerpt":{"rendered":"<p>WIRES-X PC Software Update Information (Ver.2.010) &#8211; 5\/2026 WIRES-X PC Software (Ver.2.010) &#8211; 5\/2026 Unzip the downloaded zip file into any arbitrary location. WIRES-X Remote Monitor Software (Ver.2.000) &#8211; 3\/2026 Unzip the downloaded file \u300cwiresmon-x****en.zip\u300d into any arbitrary location.Move the unzipped file to \u300cwiresmon-x\u300dPlease refer how to use on the help file\u300cWIRESMON-X.chm\u300d WIRES-X PC Software [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":3656,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-3655","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-digital-digital"],"_links":{"self":[{"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/posts\/3655","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/comments?post=3655"}],"version-history":[{"count":2,"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/posts\/3655\/revisions"}],"predecessor-version":[{"id":3658,"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/posts\/3655\/revisions\/3658"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/media\/3656"}],"wp:attachment":[{"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/media?parent=3655"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/categories?post=3655"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/radio.xreflector.es\/index.php\/wp-json\/wp\/v2\/tags?post=3655"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}